NEWS

Ningbo Yuandong auto parts manufacturing co., LTD

(Read More About Company) 

TEL:086-574-88179207

Sale TEL :086-574-88179382

ADD:NO 1,  Yunlin middle Road, Wangchun 

industrial park, yinzhou district, Ningbo, China.

FAX:086-574-88179209

E-mail:frankxiang@coolercn.com



Ningbo Lurun cooler manufacturing co., LTD

(Read More About Company)

TEL: 086-574-88431162

Sale TEL: 086-574-88033998  086-574-88080020

ADD:No. 555,Chenglangtan road,Yin jiang town,Yinzhou district,Ningbo,China

FAX:086-574-88031033

E-mail:lurun@coolercn.com



Ningbo Runchi technology co., LTD

(Read More About Company)

TEL: 0574-88179207

Sale TEL: 0574-88179382 

ADD:NO 1,  Yunlin middle Road, Wangchun 

industrial park, yinzhou district, Ningbo, China.


FAX:0574-88179209

E-mail:frankxiang@coolercn.com






NEWS

Your current location:首页 > NEWS

The influence of oil radiator of engine oil​

The published date:2015-07-14

Now many of the senior high-power diesel engine or gasoline engine with oil radiator, whose function is: warm cold start the car, the oil radiator absorbs heat from the cooling water, the oil temperature rise faster; When the temperature is higher, and cooling by cooling water. In this way, the oil temperature is stable and has suitable viscosity. Some of the vehicle's engine oil radiator work or not through the sensor to control the opening or closing of the valve body, some is by manual valve to control the work of the device or not (if manual valve is to be closed during the winter low temperature, the external environment when the temperature rises to open the valve). Engine oil to engine oil cooling radiator at the same time also have the effect of prevent oil deterioration. If the oil radiator damage will cause the oil in the water or external leakage, etc. Oil radiator caused a partial blockage of the oil pressure decline, this is because the oil in the radiator by a reduction in the oil in the engine at high temperature of the cooling ability decreased, leading to the oil viscosity is reduced, the oil pressure drop. Remove the oil radiator, when check in inlet system with kerosene, then set up the radiator, if the discontinuous flow at the exit to fuel the radiator has been partially blocked. Also can use another way: in the oil radiator inlet input a certain pressure of lubricating oil, measuring the oil outlet pressure. Such as measured pressure difference between in and out of the oil outlet obviously is too large, the oil radiator have blocking phenomenon. In pressure measurement way can check whether the radiator is leaking.

Copyright 2015   Ningbo Lu Run cooler manufacturing co., LTD    Support by: 华企立方